Integrating Sphere | Goniophotometer | Surge Generator | ESD Simulator - LISUN

The following procedures are commonly included in the Electromagnetic Interference (EMI) radiated interference test of an electrical appliance that is performed using a LISUN EMI receiver: Preparation: Before beginning the test, the electrical appliance has to have all of the necessary preparations completed. Typically, this entails placing the device in a configuration that is reflective of its use and then connecting it to a source of electrical power. Installation of Equipment It is necessary to install the LISUN EMI receiver as well as an antenna in accordance with the applicable standards and specifications. The antenna need to be positioned at a distance from the appliance that is deemed appropriate, and it ought to be positioned in such a way as to optimize the measurement of the EMI that is emitted by the appliance. Environment for testing: The environment for testing must be set up in accordance with the relevant standards and specifications. This typically involves placing

Testing for electromagnetic compatibility (EMC) known as EMI conducted immunity evaluates the capacity of electronic equipment to tolerate interference from conducted electromagnetic fields. EMC testing is another name for electromagnetic compatibility testing. The following procedures are what you should normally do in order to carry out this test using a LISUN EMI receiver: Get the equipment that will be tested (EUT) ready: Ensure that the LED light and its driver are correctly connected to the power source, then set up the apparatus in the testing area and check that it is operating well. Connect the LISUN EMI receiver to the EUT's power line. Connect the EMI receiver to the EUT's power line in accordance with the instructions provided by the manufacturer. Configure the test settings by using the control software that comes with the EMI receiver to configure the test frequency range, the frequency step, and any other pertinent parameters. Launch the exam by saying: Start