LED lamp goniophotometer for IEC/EN standard

-

The photometric performance of LED lights may be measured with the use of a device known as an LED lamp goniophotometer that has been built to fulfill the requirements of the IEC/EN standard. Standards for photometric measurements of LED lighting products are provided by the International Electrotechnical Commission (IEC) as well as the European standardizing authority (EN).

A goniophotometer is a specialized device that measures the amount of luminous intensity emitted by a light source from a variety of angles. LED lamp goniophotometers work by rotating the LED lamp while simultaneously measuring the quantity of light emitted in a number of different directions. This information is used to build a photometric distribution pattern, which gives a representation of the light output of the LED lamp across a broad range of angles. This pattern may be used to optimize the light output of the LED lamp.

The IEC and EN standards detail the processes and procedures that must be followed in order to carry out photometric measurements and report the findings. Guidelines for instrumentation, sample preparation, measurement conditions, and data processing are included in this. LED lamp goniophotometer manufacturers may guarantee that their products generate accurate and consistent results by complying to these criteria. This enables manufacturers of LED lights to fairly compare and evaluate one another's goods.

Lighting experts and manufacturers can assess the photometric performance of LED lights and compare it to that of other lighting products if they use a goniophotometer created specifically for use with LED lamps and intended to fulfill the requirements of the IEC/EN standard. This information may be used to make educated judgments on the applicability of LED bulbs for a variety of applications, including task lighting, general illumination, and accent lighting, respectively.


Comments

Post a Comment

Popular posts from this blog

-
Image
The ipx9k High Temperature Pressure Jet Waterproof Test Chamber is characterized by a waterproof grade of 9, indicating high temperature and high pressure water spraying, and spraying high temperature and high pressure water in various directions of the shell for water spraying test. In addition, k represents a function of pressurization, and under such strict conditions, its water pressure will become stronger. The ipx9 is currently a high level of waterproof protection. The IPx9 High Temperature Pressure Jet Waterproof Test Chamber is also widely used in fields such as LED lighting fixtures, display screens, household appliances industry, automobiles, and automotive accessories. At the same time, all dust and waterproof equipment can be customized according to user needs. The ipx9k High Temperature Pressure Jet Waterproof Test Chamber has four different vertical spray angles, namely 0 °, 30 °, 60 °, and 90 °, and the water pressure can reach 8000 to 10000 Kpa; Moreover, its testing r
Read more
-
Image
Capacitance  refers to the ability to hold a charge. It is a medium for realizing the storage and release of static charges, with the characteristic of permanent charge storage. Capacitor components are widely used in power supply filtering, signal filtering, signal coupling, resonance, filtering, compensation, charging and discharging, energy storage, and power separation in circuits. According to its ability to accommodate charges, it is generally measured in Farads, and the international unit is Farads. Therefore, capacitors are essential components for electronics and power. The role of capacitors: Bypass capacitors and decoupling capacitors are two devices that provide energy storage for local devices. Bypass capacitors can reduce load demand, make the output of the voltage regulator smooth, similar to a small rechargeable battery, and can be discharged and charged. The decoupling capacitor can smooth the edge signals of the device, so as to prevent the input signal from being too
Read more
-
Image
1 General 1.1 Scope and object This International Standard(IEC61032) specifies details and dimensions of test probes intended to verify the protection provided by enclosures with regard to: – protection of persons against access to hazardous parts inside the enclosure; – protection of the equipment inside the enclosure against ingress of solid foreign objects. SMT IP10T_AL The object of this International Standard is: – to bring together in one publication object probes and access probes currently specified in other standards, together with any necessary new probes;    – to guide technical committees in the selection of test sphere; – to encourage those concemed to specify test probes in accordance with those already specified in this International Standard rather than modify details and dimensions; – to limit the further proliferation of types of test probe. 1.2 General recommendations When selecting probes, priority should be given to IP code probes. The use of other probes, particul
Read more