Use LISUN goniophotometer to do CIE measurement for LED lights

-

You will need to follow these basic procedures in order to utilize a LISUN goniophotometer to make a CIE (Commission Internationale de l'Eclairage) measurement for LED lights. The CIE stands for the Commission Internationale de l'Eclairage.

In the measuring chamber of the goniophotometer, place the LED light sample and make sure that it is aligned correctly with the detector.

Adjust the parameters of the goniophotometer so that it can do CIE measurements. This may involve establishing the measuring angles, distance, and other factors in accordance with the requirements outlined in the CIE standard.

Utilizing the goniophotometer, take readings of the light that is produced by the LED sample. In most cases, this will need taking repeated measurements at a variety of angles in order to catch the whole spectrum of light that is emitted.

In order to produce a CIE chromaticity diagram, it is necessary to do an analysis on the data that was acquired by the goniophotometer. This will display the color coordinates of the LED light sample, which can then be used to evaluate the color quality and consistency of the LED light.

The findings of the CIE measurement should be generated into a report or a data file. This would normally contain the CIE chromaticity coordinates, in addition to additional data such as the intensity and color temperature of the object.

Note that the directions for taking CIE measurements might vary based on the precise type of LISUN goniophotometer that you are using. This is something that you should keep in mind. When looking for instructions on how to correctly configure and make use of the equipment for CIE measurements, it is highly recommended that one consult the user manual.

Comments

Post a Comment

Popular posts from this blog

-
Image
The ipx9k High Temperature Pressure Jet Waterproof Test Chamber is characterized by a waterproof grade of 9, indicating high temperature and high pressure water spraying, and spraying high temperature and high pressure water in various directions of the shell for water spraying test. In addition, k represents a function of pressurization, and under such strict conditions, its water pressure will become stronger. The ipx9 is currently a high level of waterproof protection. The IPx9 High Temperature Pressure Jet Waterproof Test Chamber is also widely used in fields such as LED lighting fixtures, display screens, household appliances industry, automobiles, and automotive accessories. At the same time, all dust and waterproof equipment can be customized according to user needs. The ipx9k High Temperature Pressure Jet Waterproof Test Chamber has four different vertical spray angles, namely 0 °, 30 °, 60 °, and 90 °, and the water pressure can reach 8000 to 10000 Kpa; Moreover, its testing r
Read more
-
Image
Capacitance  refers to the ability to hold a charge. It is a medium for realizing the storage and release of static charges, with the characteristic of permanent charge storage. Capacitor components are widely used in power supply filtering, signal filtering, signal coupling, resonance, filtering, compensation, charging and discharging, energy storage, and power separation in circuits. According to its ability to accommodate charges, it is generally measured in Farads, and the international unit is Farads. Therefore, capacitors are essential components for electronics and power. The role of capacitors: Bypass capacitors and decoupling capacitors are two devices that provide energy storage for local devices. Bypass capacitors can reduce load demand, make the output of the voltage regulator smooth, similar to a small rechargeable battery, and can be discharged and charged. The decoupling capacitor can smooth the edge signals of the device, so as to prevent the input signal from being too
Read more
-
Image
1 General 1.1 Scope and object This International Standard(IEC61032) specifies details and dimensions of test probes intended to verify the protection provided by enclosures with regard to: – protection of persons against access to hazardous parts inside the enclosure; – protection of the equipment inside the enclosure against ingress of solid foreign objects. SMT IP10T_AL The object of this International Standard is: – to bring together in one publication object probes and access probes currently specified in other standards, together with any necessary new probes;    – to guide technical committees in the selection of test sphere; – to encourage those concemed to specify test probes in accordance with those already specified in this International Standard rather than modify details and dimensions; – to limit the further proliferation of types of test probe. 1.2 General recommendations When selecting probes, priority should be given to IP code probes. The use of other probes, particul
Read more