How to do LED photometric test with a 3-meter integrating sphere?

-

LED light output may be measured using a photometric test that incorporates the use of an integrating sphere that is three meters in diameter. The following is an in-depth description of the procedures that must be followed in order to carry out this kind of test:

  • Put together the integrating sphere system. An integrating sphere, a photometer, and a spectrophotometer are the standard components of an integrating sphere system. Put together these individual parts in accordance with the directions provided by the manufacturer.
  • When installing the LED light within the integrating sphere, make sure that it is positioned so that it is towards the center of the sphere and that it is firmly fastened in place.
  • Before beginning the test, perform a calibration on the photometer in accordance with the instructions provided by the manufacturer. This is essential in order to guarantee accurate findings.
  • After the LED light has been placed, you must now switch it on and wait for it to reach its maximum level of brightness before proceeding.
  • Use the photometer to determine the luminous flux of the LED light. This may be done by measuring the luminous flux. This statistic reflects the total quantity of visible light that the light emits into the surrounding environment.
  • Make a note of the findings of the luminous flux measurement performed on the LED light.
  • Repeat the procedure: Repeat the procedure for any additional LED lights that are being evaluated, and then compare the findings to figure out which light generates the most light.
  • Conduct an analysis of the spectral distribution If you so like, you may make use of the spectrophotometer in order to conduct an analysis of the spectrum distribution of the light that is produced by the LED light. The results of this measurement, which often take the shape of a graph or table, offer information on the color and intensity of the light.
  • Determine the efficiency of the LED light If you so wish, you may determine the efficiency of the LED light, which is the quantity of light generated in relation to the amount of energy that is spent. The efficiency is often expressed as a percentage and need to be evaluated in relation to either industry standards or various other LED lights.

In order to get reliable results, it is essential to check that the integrating sphere system has been correctly calibrated and is being properly maintained. When using this kind of equipment, you should always be sure to follow the directions provided by the manufacturer and take all necessary safety measures.

In order to eliminate as many potential causes of mistake as possible, it is strongly suggested that the examination be carried out in a regulated setting. It is necessary to conduct the test a number of times in order to confirm its repeatability and get an accurate figure for the luminous flux on average. Documenting and submitting the findings of the test to the scrutiny of an authority in the area of LED lighting for the purpose of validating their veracity and gaining more comprehension of the topic is essential.

Comments

Post a Comment

Popular posts from this blog

-
Image
The ipx9k High Temperature Pressure Jet Waterproof Test Chamber is characterized by a waterproof grade of 9, indicating high temperature and high pressure water spraying, and spraying high temperature and high pressure water in various directions of the shell for water spraying test. In addition, k represents a function of pressurization, and under such strict conditions, its water pressure will become stronger. The ipx9 is currently a high level of waterproof protection. The IPx9 High Temperature Pressure Jet Waterproof Test Chamber is also widely used in fields such as LED lighting fixtures, display screens, household appliances industry, automobiles, and automotive accessories. At the same time, all dust and waterproof equipment can be customized according to user needs. The ipx9k High Temperature Pressure Jet Waterproof Test Chamber has four different vertical spray angles, namely 0 °, 30 °, 60 °, and 90 °, and the water pressure can reach 8000 to 10000 Kpa; Moreover, its testing r
Read more
-
Image
Capacitance  refers to the ability to hold a charge. It is a medium for realizing the storage and release of static charges, with the characteristic of permanent charge storage. Capacitor components are widely used in power supply filtering, signal filtering, signal coupling, resonance, filtering, compensation, charging and discharging, energy storage, and power separation in circuits. According to its ability to accommodate charges, it is generally measured in Farads, and the international unit is Farads. Therefore, capacitors are essential components for electronics and power. The role of capacitors: Bypass capacitors and decoupling capacitors are two devices that provide energy storage for local devices. Bypass capacitors can reduce load demand, make the output of the voltage regulator smooth, similar to a small rechargeable battery, and can be discharged and charged. The decoupling capacitor can smooth the edge signals of the device, so as to prevent the input signal from being too
Read more
-
Image
1 General 1.1 Scope and object This International Standard(IEC61032) specifies details and dimensions of test probes intended to verify the protection provided by enclosures with regard to: – protection of persons against access to hazardous parts inside the enclosure; – protection of the equipment inside the enclosure against ingress of solid foreign objects. SMT IP10T_AL The object of this International Standard is: – to bring together in one publication object probes and access probes currently specified in other standards, together with any necessary new probes;    – to guide technical committees in the selection of test sphere; – to encourage those concemed to specify test probes in accordance with those already specified in this International Standard rather than modify details and dimensions; – to limit the further proliferation of types of test probe. 1.2 General recommendations When selecting probes, priority should be given to IP code probes. The use of other probes, particul
Read more