How to test LED trip light using LISUN integrating sphere?

-

In order to put an integrating sphere through its paces while testing an LED tripod light, you would need to follow these steps:

  • Set device: Establish the integrating sphere system by doing the following: Spectroradiometer or photometer must be mounted first, then the integrating sphere must be connected to it.
  • Calibrate the system: In order to guarantee correct readings, it is necessary to do a calibration on the system.
  • Install the LED tripod light: Install the LED tripod light in a secure manner in the middle of the integrating sphere, making certain that it is centered in the correct position.
  • Gather data: Gather data by measuring the radiant flux radiated by the LED light and collecting many measurements at various places around the light.
  • Perform an analysis on the data: Carry out an analysis on the information that has been gathered in order to ascertain the luminous flux, color temperature, and any other photometric characteristics of the LED light.
  • Give an account of the results: Prepare a report that includes a complete study of the photometric features of the LED tripod light as well as a summary of the test findings.
  • Carry out the experiment once again: Carry out the experiment once more to check that the findings are accurate and to confirm that the measurements are consistent.


Comments

Post a Comment

Popular posts from this blog

-
Image
The ipx9k High Temperature Pressure Jet Waterproof Test Chamber is characterized by a waterproof grade of 9, indicating high temperature and high pressure water spraying, and spraying high temperature and high pressure water in various directions of the shell for water spraying test. In addition, k represents a function of pressurization, and under such strict conditions, its water pressure will become stronger. The ipx9 is currently a high level of waterproof protection. The IPx9 High Temperature Pressure Jet Waterproof Test Chamber is also widely used in fields such as LED lighting fixtures, display screens, household appliances industry, automobiles, and automotive accessories. At the same time, all dust and waterproof equipment can be customized according to user needs. The ipx9k High Temperature Pressure Jet Waterproof Test Chamber has four different vertical spray angles, namely 0 °, 30 °, 60 °, and 90 °, and the water pressure can reach 8000 to 10000 Kpa; Moreover, its testing r
Read more
-
Image
Capacitance  refers to the ability to hold a charge. It is a medium for realizing the storage and release of static charges, with the characteristic of permanent charge storage. Capacitor components are widely used in power supply filtering, signal filtering, signal coupling, resonance, filtering, compensation, charging and discharging, energy storage, and power separation in circuits. According to its ability to accommodate charges, it is generally measured in Farads, and the international unit is Farads. Therefore, capacitors are essential components for electronics and power. The role of capacitors: Bypass capacitors and decoupling capacitors are two devices that provide energy storage for local devices. Bypass capacitors can reduce load demand, make the output of the voltage regulator smooth, similar to a small rechargeable battery, and can be discharged and charged. The decoupling capacitor can smooth the edge signals of the device, so as to prevent the input signal from being too
Read more
-
Image
1 General 1.1 Scope and object This International Standard(IEC61032) specifies details and dimensions of test probes intended to verify the protection provided by enclosures with regard to: – protection of persons against access to hazardous parts inside the enclosure; – protection of the equipment inside the enclosure against ingress of solid foreign objects. SMT IP10T_AL The object of this International Standard is: – to bring together in one publication object probes and access probes currently specified in other standards, together with any necessary new probes;    – to guide technical committees in the selection of test sphere; – to encourage those concemed to specify test probes in accordance with those already specified in this International Standard rather than modify details and dimensions; – to limit the further proliferation of types of test probe. 1.2 General recommendations When selecting probes, priority should be given to IP code probes. The use of other probes, particul
Read more