EMI radiation conduction test procedure against LED lighting products

-

The following activities are commonly included in the Electromagnetic Interference (EMI) radiation conduction test protocol for LED lighting products:

  • Preparation: Before carrying out the test, the LED lighting product has to be in the appropriate state of readiness. Typically, this entails placing the device in a configuration that is indicative of its use and then connecting it to a source of electrical power.
  • Configuration of the Equipment It is necessary to configure the testing equipment, which may include an EMI receiver and an antenna, in accordance with the appropriate standards and specifications.
  • Environment for testing: The environment for testing must be set up in accordance with the relevant standards and specifications. This typically entails placing the LED lighting product and the testing equipment in a shielded room or a shielded enclosure to reduce the influence of electromagnetic fields from the outside.
  • Test technique: The testing procedure will normally consist of measuring the electromagnetic energy that is released by the LED lighting product and comparing the findings to the appropriate standards and specifications. In most cases, this entails measuring the intensity of the electric and magnetic fields, as well as the conducted and radiated emission, as well as the frequency spectrum of the electromagnetic energy that is being released by the LED lighting product.
  • Analysis of the data It is necessary to conduct an analysis of the data gathered during the test in order to identify whether or not the LED lighting product in question conforms with the appropriate standards and specifications.
  • Reporting: The test findings have to be reported in a manner that is required by the applicable standards and specifications. This must be done.

This technique could change based on the particular standards and criteria that the LED lighting product being tested is being evaluated against, as well as the apparatus that is being used for the evaluation. In order to guarantee that the results of the tests are trustworthy and accurate, it is essential to carry out the tests in accordance with the process that is outlined in the applicable standards and specifications.

Comments

Post a Comment

Popular posts from this blog

-
Image
The ipx9k High Temperature Pressure Jet Waterproof Test Chamber is characterized by a waterproof grade of 9, indicating high temperature and high pressure water spraying, and spraying high temperature and high pressure water in various directions of the shell for water spraying test. In addition, k represents a function of pressurization, and under such strict conditions, its water pressure will become stronger. The ipx9 is currently a high level of waterproof protection. The IPx9 High Temperature Pressure Jet Waterproof Test Chamber is also widely used in fields such as LED lighting fixtures, display screens, household appliances industry, automobiles, and automotive accessories. At the same time, all dust and waterproof equipment can be customized according to user needs. The ipx9k High Temperature Pressure Jet Waterproof Test Chamber has four different vertical spray angles, namely 0 °, 30 °, 60 °, and 90 °, and the water pressure can reach 8000 to 10000 Kpa; Moreover, its testing r
Read more
-
Image
Capacitance  refers to the ability to hold a charge. It is a medium for realizing the storage and release of static charges, with the characteristic of permanent charge storage. Capacitor components are widely used in power supply filtering, signal filtering, signal coupling, resonance, filtering, compensation, charging and discharging, energy storage, and power separation in circuits. According to its ability to accommodate charges, it is generally measured in Farads, and the international unit is Farads. Therefore, capacitors are essential components for electronics and power. The role of capacitors: Bypass capacitors and decoupling capacitors are two devices that provide energy storage for local devices. Bypass capacitors can reduce load demand, make the output of the voltage regulator smooth, similar to a small rechargeable battery, and can be discharged and charged. The decoupling capacitor can smooth the edge signals of the device, so as to prevent the input signal from being too
Read more
-
Image
1 General 1.1 Scope and object This International Standard(IEC61032) specifies details and dimensions of test probes intended to verify the protection provided by enclosures with regard to: – protection of persons against access to hazardous parts inside the enclosure; – protection of the equipment inside the enclosure against ingress of solid foreign objects. SMT IP10T_AL The object of this International Standard is: – to bring together in one publication object probes and access probes currently specified in other standards, together with any necessary new probes;    – to guide technical committees in the selection of test sphere; – to encourage those concemed to specify test probes in accordance with those already specified in this International Standard rather than modify details and dimensions; – to limit the further proliferation of types of test probe. 1.2 General recommendations When selecting probes, priority should be given to IP code probes. The use of other probes, particul
Read more