How to do surge test on LED lamps with a surge generator?

-

The following is a list of the actions that need to be taken when utilizing a surge generator to conduct a surge test on LED lamps:

  • In order to be ready, you will need to gather all of the essential equipment, such as the LED bulb, the surge generator, the test fixtures, and the measuring equipment.
  • Configuration: In this step, you will set up the test fixtures and the surge generator so that the LED bulb may be connected to the surge generator in the correct manner. Check that the test fixtures and the measuring equipment have the correct calibration before continuing.
  • For the purpose of testing, apply to the LED bulb the surge test signals that were created by the surge generator. The test signals must to be in conformity with the applicable safety and performance requirements, such as the IEC 61000-4-5.
  • Monitoring: During the course of the test, carefully monitor how well the LED bulb is functioning. It's possible that voltage, current, power, and luminous flux will be among the performance characteristics that need to be monitored. It is necessary for the monitoring equipment to be able to make precise measurements of the performance metrics.
  • The results of the test need to be evaluated in order to establish whether or not the LED bulb satisfies the requisite surge immunity levels that are defined in the applicable standards. In the event that the LED bulb does not pass the test, the reason for the failure must be identified, and the design of the product must be updated appropriately.
  • Documentation: Record both the findings of the tests and the processes that were carried out in order to facilitate future reference and to demonstrate conformity with the applicable standards.

Note: It is vital to utilize equipment that is appropriate for the test, and it is also important to follow the procedures that are stated in the applicable standards. In order to get reliable results from the tests, the methods and the equipment should be calibrated on a regular basis.

Comments

Post a Comment

Popular posts from this blog

-
Image
The ipx9k High Temperature Pressure Jet Waterproof Test Chamber is characterized by a waterproof grade of 9, indicating high temperature and high pressure water spraying, and spraying high temperature and high pressure water in various directions of the shell for water spraying test. In addition, k represents a function of pressurization, and under such strict conditions, its water pressure will become stronger. The ipx9 is currently a high level of waterproof protection. The IPx9 High Temperature Pressure Jet Waterproof Test Chamber is also widely used in fields such as LED lighting fixtures, display screens, household appliances industry, automobiles, and automotive accessories. At the same time, all dust and waterproof equipment can be customized according to user needs. The ipx9k High Temperature Pressure Jet Waterproof Test Chamber has four different vertical spray angles, namely 0 °, 30 °, 60 °, and 90 °, and the water pressure can reach 8000 to 10000 Kpa; Moreover, its testing r
Read more
-
Image
Capacitance  refers to the ability to hold a charge. It is a medium for realizing the storage and release of static charges, with the characteristic of permanent charge storage. Capacitor components are widely used in power supply filtering, signal filtering, signal coupling, resonance, filtering, compensation, charging and discharging, energy storage, and power separation in circuits. According to its ability to accommodate charges, it is generally measured in Farads, and the international unit is Farads. Therefore, capacitors are essential components for electronics and power. The role of capacitors: Bypass capacitors and decoupling capacitors are two devices that provide energy storage for local devices. Bypass capacitors can reduce load demand, make the output of the voltage regulator smooth, similar to a small rechargeable battery, and can be discharged and charged. The decoupling capacitor can smooth the edge signals of the device, so as to prevent the input signal from being too
Read more
-
Image
1 General 1.1 Scope and object This International Standard(IEC61032) specifies details and dimensions of test probes intended to verify the protection provided by enclosures with regard to: – protection of persons against access to hazardous parts inside the enclosure; – protection of the equipment inside the enclosure against ingress of solid foreign objects. SMT IP10T_AL The object of this International Standard is: – to bring together in one publication object probes and access probes currently specified in other standards, together with any necessary new probes;    – to guide technical committees in the selection of test sphere; – to encourage those concemed to specify test probes in accordance with those already specified in this International Standard rather than modify details and dimensions; – to limit the further proliferation of types of test probe. 1.2 General recommendations When selecting probes, priority should be given to IP code probes. The use of other probes, particul
Read more