Test a lightning protection device with LISUN high voltage surge generator

-

The following procedures are what you should do in order to successfully test a lightning protection device using a high voltage surge generator:

  • Prepare by doing a thorough inspection of the lightning protection equipment to guarantee that it is in excellent operating condition before beginning the test. Additionally, be sure you follow all safety protocols and dress appropriately for protection.
  • Prepare the surge generator as follows: Establish the required waveform and test voltage level for the surge generator before connecting it to the power source and turning it on.
  • Connect the lightning protection device to the surge generator. Ensure that all of the connections are secure after you have connected the lightning protection device to the surge generator.
  • Carry out the following test: Turn on the surge generator, and then deliver the high voltage surge to the equipment that protects against lightning.
  • Examine the outcomes to see: During the course of the test, pay attention to the lightning protection device and make sure that it is operating as intended. Take readings of the voltage and current levels at the lightning protection device's output and evaluate the results in light of the typical ranges for those metrics.
  • Make a note of the results: Record both the findings of the test and any observations that were made while it was being performed.

When operating a surge generator, it is essential to observe all of the safety procedures and instructions that were provided by the manufacturer. A surge generator is capable of generating high voltage and high current transients, both of which have the potential to inflict severe bodily harm or damage to electronic devices. The examination need to be carried out alone by a competent and experienced expert in the field.

Comments

Post a Comment

Popular posts from this blog

-
Image
The ipx9k High Temperature Pressure Jet Waterproof Test Chamber is characterized by a waterproof grade of 9, indicating high temperature and high pressure water spraying, and spraying high temperature and high pressure water in various directions of the shell for water spraying test. In addition, k represents a function of pressurization, and under such strict conditions, its water pressure will become stronger. The ipx9 is currently a high level of waterproof protection. The IPx9 High Temperature Pressure Jet Waterproof Test Chamber is also widely used in fields such as LED lighting fixtures, display screens, household appliances industry, automobiles, and automotive accessories. At the same time, all dust and waterproof equipment can be customized according to user needs. The ipx9k High Temperature Pressure Jet Waterproof Test Chamber has four different vertical spray angles, namely 0 °, 30 °, 60 °, and 90 °, and the water pressure can reach 8000 to 10000 Kpa; Moreover, its testing r
Read more
-
Image
Capacitance  refers to the ability to hold a charge. It is a medium for realizing the storage and release of static charges, with the characteristic of permanent charge storage. Capacitor components are widely used in power supply filtering, signal filtering, signal coupling, resonance, filtering, compensation, charging and discharging, energy storage, and power separation in circuits. According to its ability to accommodate charges, it is generally measured in Farads, and the international unit is Farads. Therefore, capacitors are essential components for electronics and power. The role of capacitors: Bypass capacitors and decoupling capacitors are two devices that provide energy storage for local devices. Bypass capacitors can reduce load demand, make the output of the voltage regulator smooth, similar to a small rechargeable battery, and can be discharged and charged. The decoupling capacitor can smooth the edge signals of the device, so as to prevent the input signal from being too
Read more
-
Image
1 General 1.1 Scope and object This International Standard(IEC61032) specifies details and dimensions of test probes intended to verify the protection provided by enclosures with regard to: – protection of persons against access to hazardous parts inside the enclosure; – protection of the equipment inside the enclosure against ingress of solid foreign objects. SMT IP10T_AL The object of this International Standard is: – to bring together in one publication object probes and access probes currently specified in other standards, together with any necessary new probes;    – to guide technical committees in the selection of test sphere; – to encourage those concemed to specify test probes in accordance with those already specified in this International Standard rather than modify details and dimensions; – to limit the further proliferation of types of test probe. 1.2 General recommendations When selecting probes, priority should be given to IP code probes. The use of other probes, particul
Read more