How to use LISUN ESD gun refer to IEC61000-4-2?

-

The following are some of the general actions that need to be taken in order to utilize the LISUN ESD cannon for electrostatic discharge (ESD) testing in accordance with the standards of IEC 61000-4-2:

  • Get the apparatus for the exam ready: During this step, you will set up the LISUN ESD gun, as well as the test fixtures and the measuring equipment. During the testing process, the test fixtures should be constructed to safely hold the LED light driver, and the measuring equipment should be calibrated and ready to go before the test begins.
  • Configure the LISUN ESD gun: The LISUN ESD gun has to be set up so that it can produce discharge pulses that are in accordance with the specifications of the IEC 61000-4-2 standard. Among these configuration options are the discharge waveform, voltage level, and pulse duration settings. The LISUN ESD gun should also be set to discharge onto the particular pins, connections, or other places on the LED light driver that are defined in IEC 61000-4-2. This configuration may be found in the standard.
  • Carry out the electrostatic discharge (ESD) test by first securing the LED light driver in the test fixture and then positioning the LISUN ESD gun such that it discharges onto the spots that have been specified. At each location, the LISUN ESD gun should be fired many times, and the reaction of the LED light driver should be recorded and studied thereafter. IEC 61000-4-2 stipulates that the discharge levels, pulse length, and waveform must all be in compliance in order to be considered acceptable.
  • Evaluate the results: The measurement data that was gathered during the ESD test has to be reviewed in order to establish whether or not the LED light driver satisfies the performance parameters that are stated in IEC 61000-4-2. The results of the tests should be documented by the manufacturer or the testing laboratory, and it should be determined whether or not the LED light driver needs any adjustments in order to verify that it satisfies the criteria of the standard.

It is important to keep in mind that the stages outlined here serve just as a basic guide and should not be considered an exhaustive or comprehensive approach. It is important to consult with a qualified testing laboratory or certifying body for guidance on the specific testing requirements for the LED light driver and the use of the LISUN ESD gun for ESD testing in accordance with IEC 61000-4-2. This is because it is important to ensure that the LED light driver is tested in accordance with the requirements of the IEC standard. The particular testing requirements and processes may change in accordance with the LED light driver's intended use and the environment in which it will be used, in addition to the standards and regulations that are applicable to the product.

Comments

Post a Comment

Popular posts from this blog

-
Image
The ipx9k High Temperature Pressure Jet Waterproof Test Chamber is characterized by a waterproof grade of 9, indicating high temperature and high pressure water spraying, and spraying high temperature and high pressure water in various directions of the shell for water spraying test. In addition, k represents a function of pressurization, and under such strict conditions, its water pressure will become stronger. The ipx9 is currently a high level of waterproof protection. The IPx9 High Temperature Pressure Jet Waterproof Test Chamber is also widely used in fields such as LED lighting fixtures, display screens, household appliances industry, automobiles, and automotive accessories. At the same time, all dust and waterproof equipment can be customized according to user needs. The ipx9k High Temperature Pressure Jet Waterproof Test Chamber has four different vertical spray angles, namely 0 °, 30 °, 60 °, and 90 °, and the water pressure can reach 8000 to 10000 Kpa; Moreover, its testing r
Read more
-
Image
Capacitance  refers to the ability to hold a charge. It is a medium for realizing the storage and release of static charges, with the characteristic of permanent charge storage. Capacitor components are widely used in power supply filtering, signal filtering, signal coupling, resonance, filtering, compensation, charging and discharging, energy storage, and power separation in circuits. According to its ability to accommodate charges, it is generally measured in Farads, and the international unit is Farads. Therefore, capacitors are essential components for electronics and power. The role of capacitors: Bypass capacitors and decoupling capacitors are two devices that provide energy storage for local devices. Bypass capacitors can reduce load demand, make the output of the voltage regulator smooth, similar to a small rechargeable battery, and can be discharged and charged. The decoupling capacitor can smooth the edge signals of the device, so as to prevent the input signal from being too
Read more
-
Image
1 General 1.1 Scope and object This International Standard(IEC61032) specifies details and dimensions of test probes intended to verify the protection provided by enclosures with regard to: – protection of persons against access to hazardous parts inside the enclosure; – protection of the equipment inside the enclosure against ingress of solid foreign objects. SMT IP10T_AL The object of this International Standard is: – to bring together in one publication object probes and access probes currently specified in other standards, together with any necessary new probes;    – to guide technical committees in the selection of test sphere; – to encourage those concemed to specify test probes in accordance with those already specified in this International Standard rather than modify details and dimensions; – to limit the further proliferation of types of test probe. 1.2 General recommendations When selecting probes, priority should be given to IP code probes. The use of other probes, particul
Read more