LED lamp test report from LISUN LMS-6000 portable CCD spectroradiometer

-

The information shown below is often included in the different parts of a test report for LED bulbs that was created by the LISUN LMS-6000 portable CCD spectroradiometer:

  1. Lamp information: This component would include details about the LED light that was being reviewed, such as the manufacturer, the model number, and any other significant information that may have been available. For example, the evaluation would look at whether or not the lamp was dimmable.
  2. Conditions for the test: This section would provide the conditions for the test, which would include the measuring distance, the environment in which the measurement was carried out, and any other relevant information that may be present.
  3. Data on the spectrum: This section is where the spectral data of the LED light will be shown. Included in these details would be the wavelength range, spectral distribution, and spectral purity.
  4. This section would provide the colorimetric data of the LED light that was being used. The chromaticity coordinates, the color temperature, and the color rendering index are the colorimetric data that would be included here (CRI).
  5. Luminous flux: The luminous flux statistics of the LED lamp would be presented in this section. These statistics would include both the luminous flux as well as the luminous intensity.
  6. After providing a summary of the results of the tests and forming inferences based on the data presented, this section will come to a conclusion on the performance of the LED light.

The LISUN LMS-6000 portable CCD spectroradiometer would provide a test report on the LED lamp. This report would include particular information on the spectral and colorimetric performance of the LED light. Because of this, it would be feasible to carry out a comprehensive examination and assessment of the capabilities offered by the LED bulb.

Comments

Post a Comment

Popular posts from this blog

-
Image
The ipx9k High Temperature Pressure Jet Waterproof Test Chamber is characterized by a waterproof grade of 9, indicating high temperature and high pressure water spraying, and spraying high temperature and high pressure water in various directions of the shell for water spraying test. In addition, k represents a function of pressurization, and under such strict conditions, its water pressure will become stronger. The ipx9 is currently a high level of waterproof protection. The IPx9 High Temperature Pressure Jet Waterproof Test Chamber is also widely used in fields such as LED lighting fixtures, display screens, household appliances industry, automobiles, and automotive accessories. At the same time, all dust and waterproof equipment can be customized according to user needs. The ipx9k High Temperature Pressure Jet Waterproof Test Chamber has four different vertical spray angles, namely 0 °, 30 °, 60 °, and 90 °, and the water pressure can reach 8000 to 10000 Kpa; Moreover, its testing r
Read more
-
Image
Capacitance  refers to the ability to hold a charge. It is a medium for realizing the storage and release of static charges, with the characteristic of permanent charge storage. Capacitor components are widely used in power supply filtering, signal filtering, signal coupling, resonance, filtering, compensation, charging and discharging, energy storage, and power separation in circuits. According to its ability to accommodate charges, it is generally measured in Farads, and the international unit is Farads. Therefore, capacitors are essential components for electronics and power. The role of capacitors: Bypass capacitors and decoupling capacitors are two devices that provide energy storage for local devices. Bypass capacitors can reduce load demand, make the output of the voltage regulator smooth, similar to a small rechargeable battery, and can be discharged and charged. The decoupling capacitor can smooth the edge signals of the device, so as to prevent the input signal from being too
Read more
-
Image
1 General 1.1 Scope and object This International Standard(IEC61032) specifies details and dimensions of test probes intended to verify the protection provided by enclosures with regard to: – protection of persons against access to hazardous parts inside the enclosure; – protection of the equipment inside the enclosure against ingress of solid foreign objects. SMT IP10T_AL The object of this International Standard is: – to bring together in one publication object probes and access probes currently specified in other standards, together with any necessary new probes;    – to guide technical committees in the selection of test sphere; – to encourage those concemed to specify test probes in accordance with those already specified in this International Standard rather than modify details and dimensions; – to limit the further proliferation of types of test probe. 1.2 General recommendations When selecting probes, priority should be given to IP code probes. The use of other probes, particul
Read more