Test LED flood light with a LISUN luminance meter

-

You may put a LISUN luminance meter through its paces by putting an LED flood light through its paces by following these steps:

  1. Prepare the environment for testing: In order to conduct testing, you will need a stable and regulated environment. Verify that the temperature and humidity levels are within the parameters specified by the luminance meter. In order to test the LED flood light, you will furthermore need a surface on which to position it.
  2. Perform a luminance meter calibration before beginning the testing process. Before beginning the testing process, you should perform a luminance meter calibration. This will guarantee that you get findings that are accurate and dependable. Check the instructions provided by the manufacturer of your luminance meter to determine the correct process for calibrating it.
  3. Install the LED flood light in the testing area After you have completed the preparations for the testing environment, install the LED flood light in the testing area. Check that it is positioned appropriately and that it is aligned correctly with the brightness meter.
  4. Turn on the LED flood light. Once the LED flood light has been turned on, give it a few minutes to get to operating temperature. This will guarantee that the findings you obtain are correct.
  5. Carry out the following test: Utilize the brightness meter to get a reading. It is possible that you may need to take many readings before obtaining an accurate average. When using the brightness meter, it is imperative that you carefully adhere to the directions provided by the manufacturer.
  6. Make a note of the results: Make sure to write down the results of the test, including the values for brightness and illuminance. Be sure to write down all of the pertinent information, such as the day and time of the exam, the setting in which the test will be conducted, and any other pertinent particulars.
  7. The test should be repeated, and if required, it should be redone with other LED flood lights. In order to get an authentic depiction of the product line, it is recommended that you do tests on a variety of various LED flood lights.
  8. After you have finished all of the exams, it is time to evaluate the outcomes of those tests. Examine the conformance of the results obtained from each LED flood light with the requirements listed for the product. Investigate the data to see if there are any abnormalities or contradictions.

These are the fundamental processes involved in putting LED flood lights through a brightness test using a LISUN meter. The particular steps and directions that you need to follow will change according to the make and model of the luminance meter that you are using. When putting LED flood lights through their paces, make it a point to review the manual provided by the manufacturer and observe all applicable safety measures.

Comments

Post a Comment

Popular posts from this blog

-
Image
The ipx9k High Temperature Pressure Jet Waterproof Test Chamber is characterized by a waterproof grade of 9, indicating high temperature and high pressure water spraying, and spraying high temperature and high pressure water in various directions of the shell for water spraying test. In addition, k represents a function of pressurization, and under such strict conditions, its water pressure will become stronger. The ipx9 is currently a high level of waterproof protection. The IPx9 High Temperature Pressure Jet Waterproof Test Chamber is also widely used in fields such as LED lighting fixtures, display screens, household appliances industry, automobiles, and automotive accessories. At the same time, all dust and waterproof equipment can be customized according to user needs. The ipx9k High Temperature Pressure Jet Waterproof Test Chamber has four different vertical spray angles, namely 0 °, 30 °, 60 °, and 90 °, and the water pressure can reach 8000 to 10000 Kpa; Moreover, its testing r
Read more
-
Image
Capacitance  refers to the ability to hold a charge. It is a medium for realizing the storage and release of static charges, with the characteristic of permanent charge storage. Capacitor components are widely used in power supply filtering, signal filtering, signal coupling, resonance, filtering, compensation, charging and discharging, energy storage, and power separation in circuits. According to its ability to accommodate charges, it is generally measured in Farads, and the international unit is Farads. Therefore, capacitors are essential components for electronics and power. The role of capacitors: Bypass capacitors and decoupling capacitors are two devices that provide energy storage for local devices. Bypass capacitors can reduce load demand, make the output of the voltage regulator smooth, similar to a small rechargeable battery, and can be discharged and charged. The decoupling capacitor can smooth the edge signals of the device, so as to prevent the input signal from being too
Read more
-
Image
1 General 1.1 Scope and object This International Standard(IEC61032) specifies details and dimensions of test probes intended to verify the protection provided by enclosures with regard to: – protection of persons against access to hazardous parts inside the enclosure; – protection of the equipment inside the enclosure against ingress of solid foreign objects. SMT IP10T_AL The object of this International Standard is: – to bring together in one publication object probes and access probes currently specified in other standards, together with any necessary new probes;    – to guide technical committees in the selection of test sphere; – to encourage those concemed to specify test probes in accordance with those already specified in this International Standard rather than modify details and dimensions; – to limit the further proliferation of types of test probe. 1.2 General recommendations When selecting probes, priority should be given to IP code probes. The use of other probes, particul
Read more