Typical report of LISUN LMS-6000 portable colorimeter

-

The LISUN LMS-6000 portable colorimeter is capable of producing reports that offer an in-depth examination of the color and light measurement of any given item or light source. These reports are typically created by the device. The following data and information are included in the report:

  1. Temperature of the Color Emitted by the Light Source The report contains a measurement of the color temperature of the light source, which is given in units of Kelvin (K). Warm light, neutral light, and cold light are the three categories that may be determined by the color temperature of the light source. The color temperature gives information on the hue of the light.
  2. Color Rendering Index (CRI): The measurement of the color rendering index is included in the report. The color rendering index is a numerical number that reflects how well a light source reproduces the colors of objects in comparison to natural light. A color rendering index (CRI) number of 100 indicates that colors have been rendered accurately, whereas a value lower than 100 suggests that certain colors may seem distorted or artificial.
  3. Spectral Power Distribution (SPD): The graph of the spectral power distribution of the light source is included in the report. This graph presents data on the distribution of light energy throughout the visible spectrum.
  4. Chromaticity Coordinates: The measurement of the chromaticity coordinates of the light source is included in the report. These coordinates offer information on the color and saturation of the light. The CIE 1931 chromaticity diagram is used to determine chromaticity coordinates, and these coordinates are stated in terms of the x and y values of the diagram.
  5. Luminous Flux: The luminous flux of the light source was measured, and the results of that measurement are included in the report. Luminous flux is measured in lumens (lm). The luminous flux is a measure that may be used to determine the total quantity of light that a source emits that is visible to the human eye.
  6. Illumination: The measurement of the illumination of the light source, which is given in units of lux, is included in the report (lx). Illumination is a measure that may be used to determine how much light is falling on a certain surface.

These are the standard parameters that are included in a report produced by the LISUN LMS-6000 portable colorimeter when it is used to measure color. The paper presents an in-depth investigation of the color and light properties of a light source, which makes it applicable to a diverse set of applications. These applications include LED lighting, display screens, and other optical systems.

Comments

Post a Comment

Popular posts from this blog

-
Image
The ipx9k High Temperature Pressure Jet Waterproof Test Chamber is characterized by a waterproof grade of 9, indicating high temperature and high pressure water spraying, and spraying high temperature and high pressure water in various directions of the shell for water spraying test. In addition, k represents a function of pressurization, and under such strict conditions, its water pressure will become stronger. The ipx9 is currently a high level of waterproof protection. The IPx9 High Temperature Pressure Jet Waterproof Test Chamber is also widely used in fields such as LED lighting fixtures, display screens, household appliances industry, automobiles, and automotive accessories. At the same time, all dust and waterproof equipment can be customized according to user needs. The ipx9k High Temperature Pressure Jet Waterproof Test Chamber has four different vertical spray angles, namely 0 °, 30 °, 60 °, and 90 °, and the water pressure can reach 8000 to 10000 Kpa; Moreover, its testing r
Read more
-
Image
Capacitance  refers to the ability to hold a charge. It is a medium for realizing the storage and release of static charges, with the characteristic of permanent charge storage. Capacitor components are widely used in power supply filtering, signal filtering, signal coupling, resonance, filtering, compensation, charging and discharging, energy storage, and power separation in circuits. According to its ability to accommodate charges, it is generally measured in Farads, and the international unit is Farads. Therefore, capacitors are essential components for electronics and power. The role of capacitors: Bypass capacitors and decoupling capacitors are two devices that provide energy storage for local devices. Bypass capacitors can reduce load demand, make the output of the voltage regulator smooth, similar to a small rechargeable battery, and can be discharged and charged. The decoupling capacitor can smooth the edge signals of the device, so as to prevent the input signal from being too
Read more
-
Image
1 General 1.1 Scope and object This International Standard(IEC61032) specifies details and dimensions of test probes intended to verify the protection provided by enclosures with regard to: – protection of persons against access to hazardous parts inside the enclosure; – protection of the equipment inside the enclosure against ingress of solid foreign objects. SMT IP10T_AL The object of this International Standard is: – to bring together in one publication object probes and access probes currently specified in other standards, together with any necessary new probes;    – to guide technical committees in the selection of test sphere; – to encourage those concemed to specify test probes in accordance with those already specified in this International Standard rather than modify details and dimensions; – to limit the further proliferation of types of test probe. 1.2 General recommendations When selecting probes, priority should be given to IP code probes. The use of other probes, particul
Read more