Introduction

Digital oscilloscopes have revolutionized the electronics industry by allowing precise measurement and analysis of electrical signals for design and troubleshooting purposes. Although learning to read fundamental waveforms on a digital oscilloscope is important, understanding sophisticated measuring methods may greatly expand the instrument's usefulness.

In this post, we'll look at how digital oscilloscopes may be used for a wide range of sophisticated measuring applications. We'll investigate concepts including frequency analysis, fast Fourier transform (FFT), mask testing, pulse and edge measurements, and eye diagram analysis.

Engineers may get more insight into electronic systems and improve their accuracy and performance by mastering and using these cutting-edge measuring methods.

Frequency Analysis and Spectrum Analysis

Using the frequency analysis functions of a digital oscilloscope, engineers may investigate the spectral characteristics of the signals being seen on the instrument. Oscilloscopes are equipped with the ability to perform the Fast Fourier Transform (FFT), which allows for the transformation of time-domain waveforms into frequency-domain representations.

In order for engineers to analyze the signals, they may first be decomposed into the frequency bands, harmonics, noise, and distortion that make up their components. By doing frequency analysis, we are able to home in on frequencies that are of specific interest to us, quantify signal quality, and evaluate system performance over a broad range of frequencies.

Mask Testing and Pass/Fail Analysis

Digital oscilloscopes include capabilities that allow for mask testing, which makes them a helpful tool for confirming signals are within the parameters that have been defined. A comparison is made between the waveform that has been captured and the mask, which depicts a proper signal shape as specified by the engineers.

This makes it possible for engineers to do a pass/fail analysis, which enables the quick identification of signal irregularities and the verification of conformity with standards. Mask testing is useful in situations in which the signal quality cannot be compromised in any way, such as in protocols for high-speed data transmission or communication.

Pulse and Edge Measurements

Digital oscilloscopes particularly excel when it comes to capturing and analyzing the properties of signal pulses and edges. Engineers are able to make exact measurements of the pulse width, rise/fall length, overshoot, and undershoot, as well as other key parameters.

This kind of measurement is required for a wide variety of applications, including digital communications, timing analysis, and high-speed digital design, to name just a few of those categories. By correctly characterizing the properties of pulses and edges, engineers have the ability to enhance signal quality, locate the origins of distortion, and find solutions to issues connected to timing.

Eye Diagram Analysis

Eye diagram analysis is a very helpful method for determining the quality of digital communication signals. The sophisticated triggering and acquisition capabilities of digital oscilloscopes make it possible to record many signal transitions simultaneously and then superimpose those recordings onto a time-based "eye diagram."

The usage of an eye diagram may be used to get a better understanding of signal distortion, jitter, noise, and timing issues. When designing communication networks, engineers may enhance the dependability of data transmission by conducting an analysis of the eye diagram to determine the ideal signal quality and appropriate time margins.

Phase and Delay Measurements

The use of digital oscilloscopes makes it feasible for engineers to investigate signal synchronization, time intervals, and signal correlations. This is made possible by the fact that digital oscilloscopes are capable of making accurate phases and delay measurements.

These sorts of measurements are very important for a variety of different kinds of systems, including radar, wireless communication, and control systems. Engineers are able to consistently measure phase variances between distinct signals, which allows for the performance of a system to be assessed in terms of synchronization and timing requirements. LISUN has one of the best digital oscilloscopes.

Harmonic Analysis and Total Harmonic Distortion (THD)

Engineers may use digital oscilloscopes that feature fast Fourier transform (FFT) in order to carry out harmonic analysis and THD measurements. Applications in power electronics, audio systems, and motor control all need the capacity to identify the presence of harmonics in signals as well as the intensity of those harmonics.

By quantifying the distortion that is caused by harmonics, the total harmonic distortion (THD) measurement offers information on signal quality, efficiency, and compliance with harmonic distortion standards. This is done by measuring the overall amount of harmonic distortion.

Advanced Triggering and Event Detection

Digital oscilloscopes

Engineers now have the opportunity to record particular events and abnormalities in the signals they monitor thanks to increased triggering capabilities. These triggers may be activated depending on a wide variety of parameters, including edge, pulse width, runt, glitches, or certain patterns. Engineers now have the ability to record elusive or intermittent events for more in-depth examination thanks to advanced triggering. Engineers are able to explore transitory phenomena, discover signal irregularities, and solve complicated system concerns if they properly capture and isolate individual events of relevance in their investigations.

Math Functions and Mathematical Analysis

Digital oscilloscopes include a variety of mathematical functions into their design in order to facilitate improved waveform analysis. Engineers have access to the whole range of mathematical operations, including addition, subtraction, multiplication, integration, and differentiation, which they may apply to waveforms that have been collected.

These mathematical procedures may be used by engineers in order to get new insights, perform calculations, and obtain more data from signals. Mathematical analysis may be useful for a variety of purposes, including identifying links between signals and components, characterizing the behavior of the system, and assessing the characteristics of the signal.

Advanced Measurement Automation and Remote Control

Advanced measurement automation features and remote control are widespread in digital oscilloscopes. Because of this, technicians will be able to incorporate oscilloscopes into automated test setups, streamline measurement processes, and automate operations that are repetitive. Oscilloscopes that come with remote control capabilities enable centralized administration, data gathering, and analysis to take place via the use of a computer or a network.

Automation and remote control of measurements increase productivity, reduce the likelihood of errors caused by humans, and make it simpler to integrate oscilloscopes into more comprehensive testing infrastructure.

Multi-Domain Analysis and Cross-Domain Measurements

Digital oscilloscopes make it feasible to do multi-domain analysis, which brings together many different measuring capabilities in order to get a deeper understanding of a system. Engineers have the ability to correlate signals in a variety of domains, such as time-domain waveforms, frequency-domain spectra, and modulation analysis.

Because of multi-domain analysis, engineers have a much easier time understanding how the many components of a system work together to form the whole. Cross-domain measurements are required in order to properly diagnose and optimize complex signals and systems in order to achieve optimal performance.

Conclusion

If engineers are able to grasp sophisticated measuring techniques employing digital oscilloscopes, they may be able to gain greater insight, more precisely describe signals, and more accurately diagnose the behaviors of complicated systems. Digital oscilloscopes contain a wide range of functions for precise and comprehensive waveform analysis.

Some of these features include frequency analysis, mask testing, eye diagram analysis, pulse and edge measurements, and advanced triggering. By using these cutting-edge technologies, engineers have the potential to increase the accuracy and reliability of their electrical designs and applications, in addition to enhancing the overall performance of the system.

Lisun Instruments Limited was found by LISUN GROUP in 2003. LISUN quality system has been strictly certified by ISO9001:2015. As a CIE Membership, LISUN products are designed based on CIE, IEC and other international or national standards. All products passed CE certificate and authenticated by the third party lab.

Our main products are Goniophotometer, Integrating Sphere, Spectroradiometer, Surge Generator, ESD Simulator Guns, EMI Receiver, EMC Test Equipment, Electrical Safety Tester, Environmental Chamber, Temperature Chamber, Climate Chamber, Thermal Chamber, Salt Spray Test, Dust Test Chamber, Waterproof Test, RoHS Test (EDXRF), Glow Wire Test and Needle Flame Test.

Please feel free to contact us if you need any support.

Tech Dep: Service@Lisungroup.com, Cell/WhatsApp:+8615317907381

Sales Dep: Sales@Lisungroup.com, Cell/WhatsApp:+8618117273997
https://www.lisungroup.com/news/technology-news/mastering-advanced-measurement-techniques-with-digital-oscilloscopes.html