-
https://www.lisungroup.com/cases/vietnam-lisun-engineer-provide-training-and-calibration-for-lpce-3-ccd-spectroradiometer-integrating-sphere-compact-system.html

Comments

Post a Comment

Popular posts from this blog

-
Image
Introduction Infrared thermometers, including ear and forehead thermometers, are widely used in medical and industrial applications for non-contact temperature measurements. These devices require periodic calibration to ensure their accuracy and reliability. The Blackbody Furnaces and Infrared Temperature Calibrators, such as the LISUN BBF-1 Black Body Furnace | Tachometer Calibrator, provide precise calibration for these instruments, as well as for infrared body surface screening devices. This article explores the principles, applications, and benefits of blackbody furnaces and infrared temperature calibrators in the calibration process. Working Principle of Blackbody Furnaces and Infrared Temperature Calibrators A blackbody furnace simulates an ideal blackbody, which absorbs all incident radiation without reflection. Its emissivity is close to 1, making it an excellent standard for temperature calibration. The furnace emits radiation corresponding to its temperature, which can be acc...
Read more

How to use a moving detector goniophotometer to test LED tube light?

-
Image
A device that detects motion A goniophotometer is a sort of goniophotometer that measures the intensity of light produced by a light source at different angles by using a moving detector, such as a photometer or lux meter. Goniophotometers come in a variety of configurations. To analyze the performance of LED tube lights in terms of their light distribution, intensity, and uniformity, goniophotometers of this particular kind are often used for the purpose of measuring the intensity distribution of the light they emit. In order to successfully test an LED tube light with a moving detector goniophotometer, you will need to adhere to the following basic steps: The goniophotometer should be calibrated once it has been set up in accordance with the instructions provided by the manufacturer. This may include positioning the measuring chamber, adjusting the measurement angles, and confirming the photometer's or lux meter's accuracy. Place the LED tube light to be examined in the ...
Read more
-
Image
The ipx6 Waterproof Test Chamber can also be called an ipx6 strong flushing device. It uses a distance of 2.5-3 meters from the spray gun to conduct strong flushing test testing on various electronic products. IPX6 refers to preventing the invasion of large waves and damage to equipment soaked in water due to the invasion of large waves. Automobile headlights generally need to meet the IPx56 waterproof test. The test condition of IPX6 waterproof test chamber is that the nozzle inner diameter of the spray gun is 12.5mm; The water flow needs to reach 100 L/min; The water pressure needs to be adjusted according to the specified water flow; The water spraying distance needs to be 2.5m-3 meters from the shell; The water spraying time per square meter of its shell surface is about 1 minute; The shell test time should not be at least 3 minutes; The ipx6 water spray test chamber is divided into two different shapes of instruments: open type and chamber type, which can be used to test sampl...
Read more